Instruction Sheet: Model 6220Related Products
The Model 6220 is designed to be mounted on a horizontal or vertical surface that will allow sufficient airflow over the heat sink on the unit (approximately 1-2 inches of clearance). This will ensure maximum cooling effectiveness under heavy load conditions. The module may be mounting using the two mounting holes on the ends of the module. Before permanently mounting the 6220 Module, makes sure that the supplied adapter harness will reach from the module connector to the relay block. Allow enough slack so that there is not any tension on either end of the harness.
Use our general operation and installation instructions for the Latching Relay Module Headlamp Dipping Kit – Model 6220. Mounting dimensions included.
To download this PDF, click here.