Instruction Sheet: Model 6160

The 12V Auxiliary Power Module (APM) is a solid state device that receives the lamp signal from the tractor flasher and/or tail lamp circuit. The APM then provides a higher power output to operate the additional lamps. The APM power outputs are SMARTFET internationally protected transistors that are not damaged by overloading. The APM is simply added to the existing vehicle warning to receive the electrical signal to the vehicle lamps and then powers to the new lamps through the additional connection to the battery system.

Use our general operation and installation instructions for the 3 Channel, 12V LED Auxiliary Power Modules (APM) – Model 6160. Wire diagram included.

To download this PDF, click here.